Dielectric-Barrier Discharges: Their History, Discharge Physics, and Industrial Applications

Dielectric-barrier discharges (silent discharges) are used on a large industrial scale. They combine the advantages of non-equilibrium plasma properties with the ease of atmospheric-pressure operation. A prominent feature is the simple scalability from small laboratory reactors to large industrial installations with megawatt input powers. Efficient and cost-effective all-solid-state power supplies are available. The preferred frequency range lies between 1 kHz and 10 MHz, the preferred pressure range between 10 kPa and 500 kPa. Industrial applications include ozone generation, pollution control, surface treatment, high power CO₂ lasers, ultraviolet excimer lamps, excimer based mercury-free fluorescent lamps, and flat large-area plasma displays. Depending on the application and the operating conditions the discharge can have pronounced filamentary structure or fairly diffuse appearance. History, discharge physics, and plasma chemistry of dielectric-barrier discharges and their applications are discussed in detail.     

A convenient synthesis of 1,3-oxazolidin-4-ones and 1,3-oxazin-4-ones

1,3-Oxazolidin-4-ones and 1,3-oxazin-4-ones were synthesized by formal cyclocondensation of imines with α- or β-hydroxy acids.     

Cyclization Studies with N-Mannich bases of 2-substituted indoles

The synthesis of the indoles 7 , 15 , 16 with a 3-methoxyphenyl group, attached via an α-side chain of 1,2,or 3 CH₂ units, is reported. These compounds, after appropriate protection at C(3), were transformed into the N-[(dimethylamino)methyl]indoles 22 , 23 , and 24 , respectively. When treated with AcCl, these N-Mannich bases gave, in two cases, stable N-(chloromethyl)indoles 25 and 26 . In the presence of SnCl₄, ring closure occurred via electrophilic attack of 1-methylideneindolium ions on the methoxyphenyl group. Formation of seven-membered rings (→ 27 , 28 ) and eight-membered rings (→ 29 ) was found to be a favorable process. Cyclization to six-membered rings did not occur within this series.     

Sila-Analoga des Chlorphenoxamins und des Clofenetamins

Sila-analoguesA 2 andB 2 of two drugs from the benzhydryl ether class, chlorphenoxamine and clofenetamine, were synthesized for the first time by the steps shown in scheme 1. They and their precursors I–VI were characterized by their physical (Table 1) and chemical properties and their structures confirmed by n.m.r., mass and infrared spectrocopy (Tables 2–5). Their physiological effects were investigated and compared with those of the carbon analogues (Chapter 5).

---

---

1. Mitt.:R. Tacke undU. Wannagat, Mh. Chem.106, 1005 (1975).

---

Mit Auszügen aus der DissertationR. Tacke, Techn. Univ. Braunschweig 1974.     

Phase stability in the systems AeAl(2-x)Mgx (Ae = Ca, Sr, Ba): electron concentration and size controlled variations on the laves phase structural theme

The systems AeAl(2-x)Mgx (Ae = Ca, Sr, Ba) display electron concentration induced Laves phase structural changes. However, the complete sequence MgCu2 --> MgNi2 --> MgZn2 with increasing x (decreasing electron count) is only observed for Ae = Ca. Compounds SrAl(2-x)Mgx (0 < x < or = 2) and BaAl(2-x)Mgx (x = 0.85 and 2.0) were synthesized and structurally characterized by X-ray diffraction experiments. For the Sr system the structural sequence CeCu2 --> MgNi2 --> MgZn2 occurs with increasing Mg content x. Thus, larger Sr does not allow the realization of the MgCu2 structure at low x. For Ae = Ba a binary compound BaAl2 does not exist, but more Ba-rich Ba7Al13 forms. The reinvestigation of the crystal structure of Ba7Al13 by selected area and convergent beam electron diffraction in a transmission electron microscope revealed a superstructure, which subsequently could be refined from single X-ray diffraction data. The formula unit of the superstructure is Ba21Al40 (space group P31m, Z = 1, a = 10.568(1) angstroms, c = 17.205(6) angstroms). In Ba21Al40 a size match problem between Ba and Al present in Ba7Al13 is resolved. The structure of Ba7Al13 (Ba21Al40) can be considered as a Ba excess variant of the hexagonal MgNi2 Laves phase type structure. An incommensurately modulated variant of the MgNi2 structure is obtained for phases BaAl(2-x)Mgx with x = 0.8-1. At even higher Mg concentrations a structural change to the proper MgZn2 type structure takes place.     

Determination of telmisartan in human blood plasma: Part I: Immunoassay development

Telmisartan is an angiotensin II receptor antagonist and a known drug against high blood pressure. In this report, the development of a new and rapid analytical technique, an enzyme-linked immunosorbent assay (ELISA) for the determination of telmisartan in human blood plasma is described. The immunoassay is based on a conversion of 4-(N-methylhydrazino)-7-nitro-2,1,3-benzooxadiazole (MNBDH) to 4-(N-methylamino)-7-nitro-2,1,3-benzooxadiazole (MNBDA), which is detected by fluorescence spectroscopy. The limit of detection was 0.1 ng/mL, the limit of quantification was 0.3 ng/mL and the working range extended from 0.3 ng/mL to 300 ng/mL.     

Oxorhenium(V)‐ and Tricarbonylrhenium(I) Complexes with Substituted Pyrazoles as Products of the Degradation of Hydrotrispyrazolylborates

Hydrotris(3, 5‐dimethylpyrazol‐1‐yl)borate and hydrotris(3‐phenylpyrazol‐1‐yl)borate decompose during reactions with [ReOCl₃(PPh₃)₂] and [NEt₄]₂[Re(CO)₃Br₃], respectively. The generated pyrazole ligands form complexes with the rhenium(V) oxo and the rhenium(I ) tricarbonyl cores. X‐ray crystal structures of the oxo‐bridged dimer [Cl(PPh₃)(O)Re(μ‐O)(μ‐Me₂pz)₂Re(O)(HMe₂pz)Cl] ( 1 ) and [Re(CO)₃(HPhpz)₂(Phpz)] ( 2 ) (HMe₂pz = 3, 5‐dimethylpyrazole, HPhpz = 3‐phenylpyrazole) show that the substituted pyrazoles can readily deprotonate and act as monodentate or bridging anionic ligands. Re‐N bond lengths between 2.09 and 2.14Å have been observed for the bridging and between 2.12 and 2.23Å for the terminal pyrazole ligands.     

Recent Applications of α-Metalated Isocyanides in Organic Synthesis

Being both nucleophilic and electrophilic, α-metalated isocyanides can add to polar double bonds, forming heterocycles. They are also synthons for α-metalated primary amines. This article describes recent or improved procedures for their use in organic synthesis: (1) In heterocyclic syntheses to give 2-oxazolines, 2-imidazolines, 2-thiazolines, oxazoles and oligooxazoles, thiazoles, triazoles, imidazolinones, pyrroles, 5,6-dihydro-1,3-oxazines and -thiazines, and (via cycloaddition with nitrones) 2-imidazolidinones. (2) In the field of formylaminomethylenation, for example transformation of estrone methyl ether and a keto sugar into the corresponding α-formylaminoacrylic esters, and the conversion of aldehydes and ketones by 3- and 4-pyridyl-methyl isocyanides into N-(1-pyridyl-1-alkenyl)formamides and their hydrolysis to 3- and 4-acylpyridines. (3) In connection with the use of α-metalated isocyanides as synthons for α-metalated primary amines, the author demonstrates how they may be used for preparation of 1,2- and 1,3-amino alcohols, 1,2-diamines, 2,3-diaminoalkanoic acids and for synthesis of higher amino acids starting from simple amino acids.     

Etude de la fragmentation de derives de L'uracile et de la thymine par Spectrometrie de masse

Original mass spectra of uracil and thymine derivatives are presented with the corresponding fragmentation schemes. In the first series of spectra, the fragmentations of thymine derivatives, including ¹⁴C-2-thymine, dimers, and bromo thymines, confirm the basic retro Diels-Alder mechanism. The second series includes dihydro 5,6-derivatives of uracil (hydroxy and bromo substituents). The behaviour of these molecules is quite different; they are more sensitive to the substituents and a part of the fragmentation is often explained by protonated molecular ions.